|
|
|
|
P1PC
Temperature Adjustment ( 80°F to 106°F ) Temperature adjustment is controlled by the TEMP up pad. The display shows the spa temperature unless the pad is pressed. Once the pad is pressed the display shows the set temperature and the SET light comes on. Pressing the pad again will cause the set temperature to increase by one degree. After 5 seconds the digital display will automatically show the spa temperature.
Press this pad to turn the light
on high, low and off. When the
light is turned off , the jets and blower will be turned off if they are on.
Press this pad to turn the blower on and off. The blower automatically stops after 30 minutes.
Jets Press this pad to turn on the filter pump. Press it again to turn on the jet pump. Press it again to turn the jets off. The jet pump and blower turn off after 30 minutes. When the filter pump is turned on by itself it will stay on until it is manually turned off. The high speed turns off after 30 minutes. |
|
Send mail to
sales@turbotouch.com with
questions or comments about this web site.
|
